Toothbrush Tooth Brush Tufting Making Machin Machine
The three major actuation of the tufting machine: round-trip duel-cam unspaced transmission is adopted for bristle mouth, wire
feeding and wire cutting. The transmission is very easy and smooth. Technical performance is highly required, and such tufting machine is unique.
All bearings are imported from Japan.Clamp plate, dabbing cylinder and electromagnetic valve are of SMC brand of Japan. Other pneumatic components are of Mindman brand of Taiwan.
Material of Main Parts and HRC Hardness
1. The material of the 3 sets (6) of cams for the round trip of wire feeding and cutting by bristle mouth is 0.2 mm thick bearing steel (G Cr15). The HRC hardness of the part from the surface inward 0.2 mm is 60-62 degrees, and the internal HRC hardness is 45-50 degrees.
2. The material of fixed and movable bristle-feeding knives is imported DC53. Its overall HRC hardness is 60±1 degrees, and the arc run out tolerance of the movable knife is ± 0.01 mm.
3. The material of piston rod of bristle mouthbase and wire-cutting piston rod isbearing steel (G Cr15). Its overall hardness is 60±1 degrees.
4. The material of small shafts at special part is W18 Cr4 V2. The HRC hardness of the part from the surface inward 0.20 mm is 61-63 degrees, and the internal HRC hardness is 50-55 degrees. Such material is wear-resistant and not easy broken.
Audited Supplier 
The three major actuation of the tufting machine: round-trip duel-cam unspaced transmission is adopted for bristle mouth, wire
){kind=link}
){kind=link}